It’s All a Facade – DIY Fence

Another house project checked off the ol’ never ending to do list! Completing projects are always satisfying but this DIY project turned out exactly how I imagined. The before and after of our backyard is night and day so I’m super excited to share!

First let’s start with a little before action (look below). How sad!!! Behind our house there’s an alley and vacant brick building. A lot of our neighbors park their cars behind their house so sitting out on the back patio area was never really that relaxing. We watched cars and people go by, and felt like everyone was looking in on us. It wasn’t private, it wasn’t relaxing, and if/when I was sitting out eating dinner at our little bistro set, I was just staring at a line of trash and recycling bins. Not really my first preference of scenery!

In December I started looking at the cost of replacing our fence. Given that we want to start planning our kitchen remodel soon, the $$$$ estimates coming in weren’t really feasible. I started thinking. And googling. And pinteresting. I knew that I could figure out a way to make this chain link fence not so chain link fence-y. I considered purchasing more of the bamboo cover that the right side fence is covered with, but considering I don’t love the look, I opted not to. After running by a few other options with J, we decided to give covering our chain link fence with a wood plank facade a go. So spoiler alert, the chain link fence is still there, you just can’t see it!

So our backyard went from this:

To this:

Wondering how we did it? Don’t worry, I’m about to share!

Materials:

6 – 1″x3″x6′ boards

2 – 1″x10″x8′ boards

8 – 1″x8″x8′ boards

12 – 1″x6″x8′ boards

1 gallon – BEHR DECKplus Waterproofing stain (Transparent Cedar)

Exterior Wood Screws

12 – 1-1/4″ Electrical Metallic Tube 2-hole Straps

 

Assembly Instructions:

*Disclosure: I would recommend having two people assist in the actual putting together.

Since it’s two swinging doors, and ideally we wanted to still be able to open the doors if needed,  we measured each “door” and figured out we needed two sets of 72″ H x 81″ W for each. (We had Home Depot cut the planks to the length that we needed to save a step at home plus it’s free.)

We picked out the stain that we liked, and stained. And stained. And stained for a total of 3 coats on each side. We realllly didn’t want water to warp the planks so we made sure we used up the gallon of stain and then purchased this Thompson Waterproofing spray to seal the deal.

Once all the planks were stained we laid them out and picked the sequence. We wanted to make sure we put the best planks with the coolest wood grains at the top, and ones with drips or nicks at the bottom since they’d be covered by the loveseat or other furniture in the future.

I painted the side posts of the fence an aged bronze/black to go one step further in removing that chain link feel.

We then used the six 1″x3″x6′ boards to create the “frame” on the fence. We braced one on each side, and one positioned in the middle with the brackets at the top and bottom to secure to the fence and prevent the planks from sliding.

Then plank by plank, position, level and screw away! (We used a screwdriver wedged between the planks to create a consistent gap between wood planks.) After we had all the planks up, we sat back and enjoyed the transformation for about 5 minutes before I wanted to get started on gardening 🙂

We went back and forth on whether to position the wood horizontal or vertical, and I’m so happy that we landed on horizontal. It gives it a little bit more of a modern feel, and goes with our patio furniture. I’m debating what we should do with the bamboo covering on the right end, and divider fence on the left… maybe paint them black? Or cover with the faux boxwood screen squares?

If you’re renting, this option doesn’t ruin the existing fence so it’s an awesome option for renters too! If you don’t want to put in the effort there are actually a ton of privacy screen ideas to consider if you want something less permanent or even more affordable than covering your chain link fence! I ordered this faux boxwood screen squares and was pleasantly surprised at how great it looked when I covered the single door next to the wood fence.

The total cost of the fence ran us about $450 for the wood, stain, screws, and brackets which is considerably more affordable than having a company put in a new fence.

Here are some additional options:

Fabric Windscreen Cover | Faux Boxwood Hedge Covering | Bamboo Reed Fencing | Chain Link Weave

 

Shop My Backyard:

 

*Our firepit & rug are on MAJOR SALE!! Don’t miss out on them!!

You may also like

1 Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.